|
Post by coreyw on Jul 18, 2016 12:04:53 GMT -6
Do any of you have experience figuring out trailer lights? My running lights work fine but the brake lights and turn signals do not work. I hooked the trailer up to a different vehicle and everything works fine. All the plugs look like they are in good shape. Only thing I can find online is that it might be a grounding issue.
|
|
|
Post by maxsmbass on Jul 18, 2016 13:35:17 GMT -6
I just had that with my car Corey. Turns out I had a rusted grounding screw under my car. So I would check how/where it's grounded on your vehicle.
|
|
|
Post by Mark B on Jul 18, 2016 15:33:25 GMT -6
What Mike said - I have had that issue in the past too.
|
|
|
Post by bassin on Jul 18, 2016 17:46:19 GMT -6
I 3ard the motion bad ground,clean rust off ball and ground wire connection .wire brush
|
|
|
Post by coreyw on Jul 18, 2016 19:11:33 GMT -6
Thanks guys. Ended up being a blown fuse.
|
|
|
Post by stikman on Jul 20, 2016 16:03:46 GMT -6
I had a right turn signal and right brake light that would not work. Everything else worked. It also was a fuse(located in the engine compartment). Had to find the fuse in my Chilton manual. Live and learn!
|
|